Azure Film PLA Glitter filament Black, 1 kg
Good quality filament, made in Slovenia.
PLA Glitter
Introducing our PLA Glitter filaments. This material is made from our PLA Original and contains glitter particles for a more dazzling effect on your prints. Since PLA Glitter is just like normal PLA, it is biodegradable, very easy to work with and gives consistent results. However, there is one thing to be careful about when printing with PLA Glitter filaments. The glitter particles are slightly abrasive so we recommend using a 0.6mm abrasion-resistant nozzle.
PLA Glitter filament Black
Make sure your 3D prints are even more visually appealing using our PLA Glitter filament Black.
To know more about PLA filaments, read our blog.
You can access the Technical Data Sheet here.
Printing recommendations:
- Print at 200–230°C temperature for best results.
- You do not need a heated bed, however, we recommend preheating your printing table to 50–60°C.
- Use a glass bed, PEI sheet, Kapton, or Blue tape for the build platform with 3Dlac spray.
- We recommend using at least a 0.6mm nozzle to prevent clogging.
Features and properties
| Color | Black |
| Manufacturer Part No: | FP171-9005G |
| Flexibility | Low |
| Strength | Medium |
| Durability | Medium |
| Difficulty to use | Low |
| Shrinkage / Warping | Minimal |
| Weight | 1 kg |
| Diameter available: | 1,75 mm |
| Manufacturer: | AzureFilm |
Printing recommendations:
- Print at 200–230°C temperature for best results.*
- You do not need a heated bed however, we recommend preheating your printing table to 50–60°C.
- Use a glass bed, PEI sheet, Kapton, or Blue tape for the build platform with 3Dlac spray.
- We recommend using at least a 0.6mm nozzle to prevent clogging.
*Ideal temperature may vary when using different printers.